© Copyright 2021 DY Constructions Australia Pty Ltd - All Rights Reserved.
Whatever the size of your office, and whatever the scope of your office fitout or office refurbishment plans, we can provide an excellent solution for you. Delivered on time and on budget, all commercial office fitout and refurbishment work completed by us in the Sydney area is subject to your quality standards and expectations.
View our projects below:
Address: George Street, Sydney CBD, NSW 2000
Full floor new office fit out, to create virtual reality rooms for multi national company in Sydney CBD.
Project Type: Supply and installation of new plasterboard partitioning, take up of existing floor coverings, supply and installation of new carpet and vinyl floor coverings, block off existing windows using steel stud and plasterboard, supply and installation of soundproofing insulation, supply and installation of power and data points and client’s chosen pendant lights, painting of new partitioning, existing walls and existing doors using client’s supplied feature wall design.
Project Brief: The client required a full fitout of their new premises including blocking existing windows, replacing the existing flooring with new carpet and vinyl, electrical works, new reception desk, plasterboard partitioning, insulation for soundproofing, painting including specific feature wall design to match their existing global offices.
Project Result: The client was extremely happy with the works completed and commented that DY Constructions Australia has completed their new Sydney office to the highest standard of their global offices.
Address: Kent Street, Sydney CBD, NSW 2000
Refurbishment to corporate offices for national company in Sydney CBD.
Project Type: The works included to dismantle existing partitioning and install new plasterboard and glass partitioning and glass doors to suit their office layout, custom joinery for a new kitchen, podium seating and timber look screen walls to the reception area, removal of existing floor tiles and carpet tiles and replacement with broadloom carpet, and new custom made operable wall.
Project Brief: The client is a national company requiring commercial refurbishment to their corporate office floor in Sydney CBD.
Project Result: This client has since further engaged DY Constructions Australia to carry out works to their Brisbane premises.
Address: Brisbane QLD 4000
New Office Fitout for national company in Brisbane.
Project Type: The works included new full height plasterboard and full height glass partitioning, painting of new partitions and painting of new MDF doors, new operable wall to divide the meeting room and kitchen, including ceiling alteration work for operable wall.
Project Brief: The client was relocating to a new premises and needed a new office fitout
Project Result: All works were completed on time and within budget and to the high level of quality requested by the client.
Address: Pitt Street, Sydney CBD, NSW 2000
New Office Fitout in Sydney CBD on a Design & Construct basis.
Project Type: The works included to remove existing plasterboard partitioning including make good works to ceilings, carpet and walls, new plasterboard and glass partitioning and glass doors with privacy film, electrical, data, painting, carpet tiles and alterations/relocations to existing workstations to suit the new office layout.
Project Brief: The client was relocating to a new premises and needed a new office fitout, including removal of some of the existing fitout to suit their business function requiring interior design, organising landlord and council approvals, and consultants as required to meet the building managers Investa Property Group requirements.
Project Result: The client has since engaged DY Constructions Australia to carry out further works to their office to suit their growing business functions.
Address: George Street, Parramatta, NSW 2150
Office Refurbishment In Paramatta CBD for a national company, on a Design & Construct basis.
Project Type: The refurbishment works included to dismantle and remove existing workstations, new plasterboard and glass partitions, privacy film, make good works to carpet tiles where partitions have been removed, patch painting of existing walls and painting of new and existing doors, electrical and data, new office workstations with privacy screens, including delivery, assembly and installation.
Project Brief: The client wanted to refurbish their offices, and install new bench style workstations with privacy screens.
Project Result: Some of the works were done at weekends while the office was unoccupied, enabling the fit out works to be completed to fit in with the clients schedule.
Address: Showground Road, Olympic Park NSW 2127
New Office Fitout for a multi national company on a Design & Construct basis, including corporate relocation services.
Project Type: The new Fitout included plasterboard walls, painting new and existing walls, new joinery and furniture items, electrical and data works, new chilled water system and plumbing alterations, split air conditioning system for the server room, commercial steam cleaning of carpet. The works included to relocate existing workstations & furniture from the existing to the new premises.
Project Brief: The client was relocating to a new premise and needed a new office fitout including removal of some of the existing fitout to suit their business function.
Project Result: The fit out works were completed on schedule, to facilitate the relocation of the clients furniture and workstations to be done over a weekend, enabling the clients staff to start work at the new premises on the Monday morning.
Address: Silverwater Road, Silverwater NSW 2127
2 Floor New Office Fitout for national company on a Design & Construct basis.
Project Type: The fit out works included, installation of new plasterboard walls, new doors with re-used glass partitions, installation of safety film for full height glass partitions, painting of new partitions, new joinery, and electrical and data works. The relocation of existing workstations and furniture from the clients old office was also included.
Project Brief: The client had signed a lease at their new office in a Silverwater business park, and required interior design, and a full office fit out over two floors
Project Result: Note also that this client was referred to DY Constructions Australia by the previous tenant of the premises for whom we were doing the strip out and make good of the office. The client has since further engaged DY Constructions Australia to additional works to refurbish the bathrooms to their new premises.
Address: Alexandria, Inner-City, NSW 2015
Office Design & Construct on mezzanine level of clients premises in Alexandria business park.
Project Type: Design and construct of multiple offices, a meeting room and a break out area in black aluminium partitioning including essential services works such as Electrical and Fire Protection.
Project Brief: Hillsong Alexandria required us to build glass partitioning and plasterboard partitioning for their offices including dismantling and removing steel cages which enclosed the offices. DY Constructions designed and built glass partitioned offices with full height solid core MDF doors in this unusual industrial type space which allowed greater privacy for their staff. We also installed a glass sliding door.
Project Result: The project was constructed to meet the client’s expectations where the project was completed on time, within budget and to the quality they expected. The client subsequently asked us to complete other works for their Alexandria premises.
Address: Bourke Road, Mascot NSW 2020
Office Stripout and Refurbishment works for a multi national company.
Project Type: The refurbishment works included removal of plasterboard partitioning, workstations, furniture and joinery, new plasterboard partitioning to build a new server room in the new tenancy space they were moving into. Works also included insulation, anti static floor vinyl, re carpeting and repainting, relocating workstations to suit their new layout and new carpet tiles for the tenancy make good.
Project Brief: The client was a national company, requiring stripout and make good works, to hand back part of their office space in a corporate office building.
Project Result: This client has since engaged DY Constructions Australia three times for further works including reconfiguring workstations to suit their staffing needs and electrical works.
Address: Bourke Road, Mascot NSW 2020
Full floor Office Refurbishment works for the building’s landlord, in multi storey building in Mascot Sydney.
Project Type: The works included removal of existing broadloom carpet and floor vinyl and replacement with commercial carpet tiles, replacement of damaged ceiling tiles and light diffusers and make good works to ducted skirtings.
Project Brief: This client is the Landlord of our existing client ADP Payroll, and made contact after inspecting the works we completed for their tenant. The client required refurbishment works of another floor of the building, to make ready to lease the premises to a new tenant.
Project Result: This client has since further engaged DY Constructions Australia for refurbishment of the building’s lobby areas, including re carpeting of the building’s lifts.
Address: Tollis Place, Seven Hills NSW 2147
Office Refurbishment and Fit Out works in industrial area of Sydney.
Project Type: The refurbishment works included installation of new suspended grid ceilings, new plasterboard partitioning with new MDF doors, new plasterboard walls, new fixed aluminium window, acoustic insulation for meeting room, thermal insulation to new perimeter stud walls, painting of new partitions and doors, air conditioning works and electrical and data works to suit the new layout.
Project Brief: Constructions Australia was engaged to do refurbishment and alteration works to the existing premise of the client.
Project Result: All fit out works were completed on time, within budget and to the high level of quality requested by the client.
Address: Condell Park, Canterbury Bankstown Area, NSW 2200
Warehouse/Factory Office Partitions in industrial area, for multi national client.
Project Type: Supply and installation of new 3000mm high and 1200mm high villaboard partitioning including three new steel stud columns to the ceiling height of approximately 10 metres and painting of new partitions. Also included use of a scissor lift to facilitate works from heights.
Project Brief: The client needed villaboard partitioning installed in their factory unit with a ceiling height of approximately 10 metres. They needed the works completed quickly with an immediate start date.
Project Result: The client was happy with the works completed and has since engaged DY Constructions Australia to propose on further works for another premises.